nVent HOFFMAN Industrial Corrosion Inhibitors

Use Corrosion Inhibitors to protect electronic components inside the enclosure against corrosion.

• It is simple and economical to use, no surface preparation is required and puts protected equipment to use immediately without degreasing or coating removal.
• Each inhibitor contains a special chemical combination that vaporizes and condenses on all surfaces in an enclosed area.
• Vapors will redeposit as needed in the event of condensation of moisture on surfaces.
• These vapors reach every part of an enclosure, protecting all interior components.
• They do not interfere with electrical, optical or mechanical surface properties.
• Protection is effective even in salt-water atmospheres.
• The normal useful life-span of Hoffman corrosion inhibitors is in excess of one year.
• Inhibitor life expectancy is shortened by approximately 25 percent when exposed to temperatures above 104 F (40 C).
• Provides continuous long-term corrosion protection
• Eliminates the need of oiling, plating or dipping metal
• Enclosures containing corrosion inhibitors must be reasonably sealed or more frequent replacement of corrosion inhibitor is needed
• Non-toxic and safe to handle and apply
• All Corrosion Inhibitors (Except Spray) have adhesive backing allows fast, no-tool installation