Leviton OSC Series PIR Occupancy Sensors

The all-digital and microprocessor based OSCXX-I is the most advanced infrared ceiling sensor available. Self-calibrating sensitivity and timer allow the installer to “install and forget. in

• 0 - 95% non-condensing, for indoor use only relative humidity
• Ambient light recognition: A light sensor prevents lights from turning on when the room is adequately lit by natural light
• Custom off-white color matched for shaded ceilings and most common ceiling tiles
• Fast, simple installation: easy base mount, three wire connection (low voltage) and twist-and-lock detector attachment
• Flexible base mounting: supplied twist-and-lock base mount permits fast alignment, supplied cover hides mounting hardware and wires, can be used with raceways for hard surface installations
• High motion sensitivity: large lens area and multi-element lens design gives excellent range and sensitivity
• High-impact plastic material
• Maximum reliability, low cost: all digital circuitry uses a minimum of components
• Non-volatile memory: learned and adjusted settings saved in protected memory are not lost during power outages
• PIR masking: pre-scored masking disks are provided with the device for fine tuning the field-of-view
• Self adjusting: internal microprocessor continually analyzes, evaluates and adjusts the infrared sensitivity and time delay
• Walk-through: provides increased energy savings by decreasing the time delay to 2.5min when someone momentarily walks through the monitored space